Welcome guide · Puppy Corner Odor Eliminator

Your Puppy Corner Odor Eliminator: set up in 10 minutes

Thanks for your order. This guide shows you how to charge it, where to put it and how to pick a mode.

Michael Northcutt, PhD, author of this guideBy Michael Northcutt, PhD · Last updated October 10, 2026
Odor eliminator mounted high on the wall above a crate where a Chihuahua puppy rests

What is in the box

  • One Puppy Corner Odor Eliminator (white, about 9 x 9 x 3 cm, 170 g)
  • Its wall plate with a 3M adhesive pad

It runs on a rechargeable 3600mAh battery that charges by USB. There is no filter, no liquid and no added fragrance.

Step 1: Charge it first

Charge the battery fully by USB before you mount it. The charging port sits on the side of the device.

Step 2: Pick the right spot

  • Up high, out of puppy reach. Puppies chew, and this is a battery device.
  • Near the crate, never inside it. The wall above the crate area or the pee pads works well.
  • In a ventilated room. A room with a window or good airflow is best.
  • Close to the smell. The puppy corner, the pee pad spot or the laundry room.

Step 3: Stick it on the wall

  1. Attach the 3M adhesive to the back plate of the device.
  2. Peel off the backing from the adhesive.
  3. Press the switch gently to choose a mode (see below).
  4. Press it onto a clean, dry wall and hold it firmly for a few seconds.

Step 4: Choose a mode

Mode 1: motion sensing. A blue light breathes when it is on and waiting. When it detects people or animals, it starts 10 seconds after they leave. It runs for 30 minutes with a steady red light, then goes back to blue. If nothing moves for a long time, it still runs for 30 minutes every 90 minutes.
Mode 2: timed. It runs for 30 minutes every 6 hours. The red light stays on while it runs. The blue light comes back when it finishes.

Charging it again

The device lifts off its wall plate, so you don’t have to unstick anything. Twist it off the plate, charge it by USB, then twist it back on.

Cleaning the outside

  • Wipe the outside with a soft, dry cloth.
  • Keep water, cleaning sprays and liquids away from it.
  • Keep the sensor dome and the vent clear of dust.

What it does and what it doesn’t do

  • It releases negative ions on a schedule, with no sprays, no liquids and no added fragrance.
  • It runs by itself in the mode you choose, so there is nothing to spray or refill.
It does not replace cleaning up accidents. Clean every pee spot with an enzyme cleaner first. Wash the crate blanket and replace pee pads as usual. The device is for the corner between cleanups.

When to contact us

  • It arrived damaged or something is missing.
  • It won’t charge, or no light comes on after a full charge.
  • It never switches to the red light in either mode.
  • The adhesive won’t hold on a clean, dry wall.

Email support@lovemypuppy.store with your order number. A real person reads every email.

Blankets from the puppy corner end up in the wash. Washer Cleaner Tablets keep the washer itself fresh. Still in the first weeks? The First 14 Days Kit includes an accident log, so you can spot the pattern behind the mess.
Your 45-day money-back guarantee. Not happy within 45 days of delivery? Email support@lovemypuppy.store with your order number for a full refund. No need to send it back.

Want a copy for the fridge? Use your browser’s Print button. General information for your household, not veterinary advice.

Michael Northcutt, PhD
About the author: Michael Northcutt, PhD
Certified Companion Animal Rehabilitation Therapist, NC State College of Veterinary Medicine. 14 years of hands-on work with companion animals. Not a veterinarian.